1
Love4Taylor 350 天前 1
client-source-address
Use this parameter to enable the MITM function on some devices only. It's a list parameter using commas as the separator. You may specify a single IP address or use a CIDR block. Both IPv4 and IPv6 are supported. You may use the - prefix to exclude some clients, e.g., client-source-address = -192.168.1.2, 0.0.0.0/0 If the parameter is not set, MITM is enabled for all clients. A equivalent to client-source-address = 0.0.0.0/0, ::/0 127.0.0.1 should be included if you want to enable MITM for the current device. from https://manual.nssurge.com/http-processing/mitm.html |
2
BridgeCham 350 天前
为什么我开启 DHCP 后,整个网络都卡卡的,加载非常慢.
|
3
SandyLee 350 天前 via iPhone
是不是开了 ipv6 ,把 ipv6 关掉试试
|
4
christin OP @BridgeCham 你可以在网络查看器里面看一下是不是分流走错了
|
5
BridgeCham 350 天前
@christin #4 重新整理一下下次试试
|
6
1002xin 350 天前
@BridgeCham #5 看下路由器还有光猫的 DHCP 关了没
|
7
BridgeCham 350 天前 via iPhone
|
8
1002xin 349 天前
@BridgeCham #7 都补充上去即可,哪个快走哪个,我一般情况直接去掉 system ,供应商的偶尔有劫持的情况
|