V2EX = way to explore
V2EX 是一个关于分享和探索的地方
现在注册
已注册用户请  登录
V2EX 提问指南
olaloong
V2EX  ›  问与答

WireGuard 访问不通 3389 端口,求赐教

  •  
  •   olaloong · 2021-10-26 11:26:32 +08:00 · 2032 次点击
    这是一个创建于 1129 天前的主题,其中的信息可能已经有所发展或是发生改变。

    我有两个局域网,分别是 192.168.203.0/24 192.168.211.0/24 ,两个局域网网内分别有一台设备接入 WireGuard, 通过 WireGuard 打通,WireGuard 节点网段为 10.0.110.0/24 ,一切 OK 。

    但是最近,10.0.110.110 ( Win10 设备)无法通过远程桌面连接了,ping 以及 http 都是能正常的: 55LoWR.png tcp ping 试了,就 3389 不通: 55Omfs.png 于此同时,我通过 10.0.110.110:5555 连上 softether vpn ,在 softether vpn 内是可以访问的: 55zwwV.png

    一开始以为是 Windows 防火墙问题,但是关闭防火墙后问题依旧。换个思路让 10.0.110.100 ( Ubuntu )用 ssh 监听 3389 端口,果然又不通了: 55j8JJ.png

    基本判断问题在中转节点,但是检查了各处配置,没看出问题:

    • route
    ubuntu@cd:~$ route
    Kernel IP routing table
    Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
    default         _gateway        0.0.0.0         UG    100    0        0 eth0
    10.0.12.0       0.0.0.0         255.255.252.0   U     0      0        0 eth0
    10.0.110.0      0.0.0.0         255.255.255.0   U     0      0        0 wg0
    172.17.0.0      0.0.0.0         255.255.0.0     U     0      0        0 docker0
    192.168.203.0   0.0.0.0         255.255.255.0   U     0      0        0 wg0
    192.168.211.0   0.0.0.0         255.255.255.0   U     0      0        0 wg0
    
    • ifconfig
    wg0: flags=209<UP,POINTOPOINT,RUNNING,NOARP>  mtu 1200
            inet 10.0.110.10  netmask 255.255.255.255  destination 10.0.110.10
            unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  txqueuelen 1000  (UNSPEC)
            RX packets 16195152  bytes 5253025408 (5.2 GB)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 15604436  bytes 5264336568 (5.2 GB)
            TX errors 165  dropped 2097 overruns 0  carrier 0  collisions 0
    
    
    • iptables
    ubuntu@cd:~$ sudo iptables -nvL
    Chain INPUT (policy ACCEPT 64105 packets, 17M bytes)
     pkts bytes target     prot opt in     out     source               destination         
     3080 3782K udp2rawDwrW_ae1afd8c_C0  tcp  --  *      *       0.0.0.0/0            0.0.0.0/0            tcp dpt:12581
      66M   12G ufw-before-logging-input  all  --  *      *       0.0.0.0/0            0.0.0.0/0           
      66M   12G ufw-before-input  all  --  *      *       0.0.0.0/0            0.0.0.0/0           
      63M   12G ufw-after-input  all  --  *      *       0.0.0.0/0            0.0.0.0/0           
      63M   12G ufw-after-logging-input  all  --  *      *       0.0.0.0/0            0.0.0.0/0           
      63M   12G ufw-reject-input  all  --  *      *       0.0.0.0/0            0.0.0.0/0           
      63M   12G ufw-track-input  all  --  *      *       0.0.0.0/0            0.0.0.0/0           
    
    Chain FORWARD (policy ACCEPT 30583 packets, 12M bytes)
     pkts bytes target     prot opt in     out     source               destination         
     213M   73G DOCKER-USER  all  --  *      *       0.0.0.0/0            0.0.0.0/0           
     213M   73G DOCKER-ISOLATION-STAGE-1  all  --  *      *       0.0.0.0/0            0.0.0.0/0           
      94M   57G ACCEPT     all  --  *      docker0  0.0.0.0/0            0.0.0.0/0            ctstate RELATED,ESTABLISHED
    13852  817K DOCKER     all  --  *      docker0  0.0.0.0/0            0.0.0.0/0           
     105M   11G ACCEPT     all  --  docker0 !docker0  0.0.0.0/0            0.0.0.0/0           
        0     0 ACCEPT     all  --  docker0 docker0  0.0.0.0/0            0.0.0.0/0           
      14M 4567M ufw-before-logging-forward  all  --  *      *       0.0.0.0/0            0.0.0.0/0           
      14M 4567M ufw-before-forward  all  --  *      *       0.0.0.0/0            0.0.0.0/0           
      14M 4567M ufw-after-forward  all  --  *      *       0.0.0.0/0            0.0.0.0/0           
      14M 4567M ufw-after-logging-forward  all  --  *      *       0.0.0.0/0            0.0.0.0/0           
      14M 4567M ufw-reject-forward  all  --  *      *       0.0.0.0/0            0.0.0.0/0           
      14M 4567M ufw-track-forward  all  --  *      *       0.0.0.0/0            0.0.0.0/0           
    
    Chain OUTPUT (policy ACCEPT 69257 packets, 23M bytes)
     pkts bytes target     prot opt in     out     source               destination         
      72M   23G ufw-before-logging-output  all  --  *      *       0.0.0.0/0            0.0.0.0/0           
      72M   23G ufw-before-output  all  --  *      *       0.0.0.0/0            0.0.0.0/0           
      69M   22G ufw-after-output  all  --  *      *       0.0.0.0/0            0.0.0.0/0           
      69M   22G ufw-after-logging-output  all  --  *      *       0.0.0.0/0            0.0.0.0/0           
      69M   22G ufw-reject-output  all  --  *      *       0.0.0.0/0            0.0.0.0/0           
      69M   22G ufw-track-output  all  --  *      *       0.0.0.0/0            0.0.0.0/0           
    
    Chain DOCKER (1 references)
     pkts bytes target     prot opt in     out     source               destination         
      138  6976 ACCEPT     tcp  --  !docker0 docker0  0.0.0.0/0            172.17.0.3           tcp dpt:8080
      154  8272 ACCEPT     tcp  --  !docker0 docker0  0.0.0.0/0            172.17.0.2           tcp dpt:1358
    10841  643K ACCEPT     tcp  --  !docker0 docker0  0.0.0.0/0            172.17.0.4           tcp dpt:3306
      157  8407 ACCEPT     tcp  --  !docker0 docker0  0.0.0.0/0            172.17.0.5           tcp dpt:27017
    
    Chain DOCKER-ISOLATION-STAGE-1 (1 references)
     pkts bytes target     prot opt in     out     source               destination         
     105M   11G DOCKER-ISOLATION-STAGE-2  all  --  docker0 !docker0  0.0.0.0/0            0.0.0.0/0           
     213M   73G RETURN     all  --  *      *       0.0.0.0/0            0.0.0.0/0           
    
    Chain DOCKER-ISOLATION-STAGE-2 (1 references)
     pkts bytes target     prot opt in     out     source               destination         
        0     0 DROP       all  --  *      docker0  0.0.0.0/0            0.0.0.0/0           
     105M   11G RETURN     all  --  *      *       0.0.0.0/0            0.0.0.0/0           
    
    Chain DOCKER-USER (1 references)
     pkts bytes target     prot opt in     out     source               destination         
     213M   73G RETURN     all  --  *      *       0.0.0.0/0            0.0.0.0/0           
    
    Chain udp2rawDwrW_ae1afd8c_C0 (1 references)
     pkts bytes target     prot opt in     out     source               destination         
     3080 3782K DROP       all  --  *      *       0.0.0.0/0            0.0.0.0/0           
    
    Chain ufw-after-forward (1 references)
     pkts bytes target     prot opt in     out     source               destination         
    
    Chain ufw-after-input (1 references)
     pkts bytes target     prot opt in     out     source               destination         
    
    Chain ufw-after-logging-forward (1 references)
     pkts bytes target     prot opt in     out     source               destination         
    
    Chain ufw-after-logging-input (1 references)
     pkts bytes target     prot opt in     out     source               destination         
    
    Chain ufw-after-logging-output (1 references)
     pkts bytes target     prot opt in     out     source               destination         
    
    Chain ufw-after-output (1 references)
     pkts bytes target     prot opt in     out     source               destination         
    
    Chain ufw-before-forward (1 references)
     pkts bytes target     prot opt in     out     source               destination         
    
    Chain ufw-before-input (1 references)
     pkts bytes target     prot opt in     out     source               destination         
    
    Chain ufw-before-logging-forward (1 references)
     pkts bytes target     prot opt in     out     source               destination         
    
    Chain ufw-before-logging-input (1 references)
     pkts bytes target     prot opt in     out     source               destination         
    
    Chain ufw-before-logging-output (1 references)
     pkts bytes target     prot opt in     out     source               destination         
    
    Chain ufw-before-output (1 references)
     pkts bytes target     prot opt in     out     source               destination         
    
    Chain ufw-reject-forward (1 references)
     pkts bytes target     prot opt in     out     source               destination         
    
    Chain ufw-reject-input (1 references)
     pkts bytes target     prot opt in     out     source               destination         
    
    Chain ufw-reject-output (1 references)
     pkts bytes target     prot opt in     out     source               destination         
    
    Chain ufw-track-forward (1 references)
     pkts bytes target     prot opt in     out     source               destination         
    
    Chain ufw-track-input (1 references)
     pkts bytes target     prot opt in     out     source               destination         
    
    Chain ufw-track-output (1 references)
     pkts bytes target     prot opt in     out     source               destination   
    
    • ufw
    ubuntu@cd:~$ sudo ufw status
    Status: inactive
    

    在服务端用 tcpdump 进行抓包,是这么个结果:

    • tcpdump(8) tcp port 3389 -i eth0 -vvX -w 'rdp.%F-%H.pcap' -C 100 -G 3600 -W 5 -U 55vvut.png

    实在没辙了,各位大佬有别的排查思路么?不然就只能给 RDP 换端口,或者套一层 softether vpn 用了,难顶

    附上中转节点 wg 配置:

    55xyrt.png

    第 1 条附言  ·  2021-10-26 13:53:22 +08:00
    破案了,nat prerouting 有条针对 3389 的规则,果然还是 iptables 的问题😭
    iptables -nvl 得记得加 -t 把各个表都看看,或者用 iptables-save 看
    9 条回复    2021-11-10 14:16:48 +08:00
    zhangsanfeng2012
        1
    zhangsanfeng2012  
       2021-10-26 11:39:25 +08:00
    在中转节点和 10.0.110.110 上同时抓包看看
    olaloong
        2
    olaloong  
    OP
       2021-10-26 11:50:51 +08:00
    @zhangsanfeng2012 有试的,比如从 10.0.110.120 访问 10.0.110.110:3389 ,10.0.110.120 和 中转节点都是一次 SYN 四次重传,10.0.110.110 没收到包
    * 10.0.110.120
    [![5ICknA.png]( https://z3.ax1x.com/2021/10/26/5ICknA.png)]( https://imgtu.com/i/5ICknA)
    * 10.0.110.10 中转节点
    [![5ICU9U.png]( https://z3.ax1x.com/2021/10/26/5ICU9U.png)]( https://imgtu.com/i/5ICU9U)
    * 10.0.110.110
    空白
    1423
        3
    1423  
       2021-10-26 12:09:05 +08:00
    不走隧道,10.0.110.110 机器上的 3389 可以通么
    olaloong
        4
    olaloong  
    OP
       2021-10-26 12:11:17 +08:00
    @1423 可以,甚至在隧道里套一层 VPN (上文中的 softether vpn )后,也可以,只有隧道不行
    zhangsanfeng2012
        5
    zhangsanfeng2012  
       2021-10-26 12:52:54 +08:00 via Android   ❤️ 1
    @olaloong 中转节点 wg0.conf 和 iptables-save 贴出来看看
    zhangsanfeng2012
        6
    zhangsanfeng2012  
       2021-10-26 12:54:42 +08:00 via Android
    @zhangsanfeng2012 还有 ip rule
    olaloong
        7
    olaloong  
    OP
       2021-10-26 13:51:33 +08:00
    @zhangsanfeng2012 麻了,nat prerouting 有条针对 3389 的规则,不知道啥时候加的😭
    忘了 iptables -nvl 只是看 filter 表了😭
    感谢大佬🙏
    dylanninin
        8
    dylanninin  
       2021-10-26 14:18:42 +08:00
    @olaloong 中转节点里抓包后,wireshark 过滤器改一改,用 `ip.dst == 10.0.110.110` ,看看完整的信息是怎样的
    U8Gu9Hs3H3jD
        9
    U8Gu9Hs3H3jD  
       2021-11-10 14:16:48 +08:00
    zan
    关于   ·   帮助文档   ·   博客   ·   API   ·   FAQ   ·   实用小工具   ·   3218 人在线   最高记录 6679   ·     Select Language
    创意工作者们的社区
    World is powered by solitude
    VERSION: 3.9.8.5 · 33ms · UTC 12:56 · PVG 20:56 · LAX 04:56 · JFK 07:56
    Developed with CodeLauncher
    ♥ Do have faith in what you're doing.