如意云固件分享: RY-1 的 OpenWrt 的 trunk 固件 Ver: OpenWrt Chaos Calmer r44245 / LuCI (git-15.030.11829-7952ad5)

[shangjiyu]

貌似很少有人做这个固件了? 前些天有人找我问, 我就顺便放一个出来

固件地址Dropbox: https://www.dropbox.com/s/837riw7mbwpn23k/openwrt-ramips-mt7620-ry-1-squashfs-sysupgrade.bin?dl=0

固件包含了shadosocks, chinadns, dns2sock, dnscypt-proxy redsocks2 privoxy 迅雷远程,全功能aria2等

最终解释权归本人所有(听说这句话没有法律效应)
disclaimer: 请正确刷入固件,刷坏我也没有办法(刷的坏才怪)...

原生固件默认没有开启wifi, 已知led灯显示不正确(应该是dts不正确吧), 不爱折腾的还是别刷吧, 稳定版本是不是更好?

由于修正了OpenWrt 上 add_xCloud-RY-1A_support.patch, 添加了独立的DTeam RY-1A profile并修正的gpio引脚 led灯 可以点亮了..(授之予鱼不如授人于渔 -_- ).导致就的dropbox链接失效.. 这里贴上新的地址:
https://www.dropbox.com/s/ass8afy1epkpbvd/openwrt-ramips-mt7620-ry-1a-squashfs-sysupgrade.bin?dl=0

刚刚更新到trunk最新Changeset 45056
add:
python 环境 可以安装Sync-Y
sxplugin(新版闪讯 singleNet) 低调使用 呵呵
SQM QoS 据说很强大, 不会用...

any other ...

again: 免责声明...

[lazycat]

感谢。。。一直用着N14U的固件。。。
能不能集成一个带802.1x验证的固件呢？

[shangjiyu]

@lazycat full版的wpad?

[mozutaba]

先感谢，再问：
系统升级刷入？
有什么已知bug？
ss会不会卡住？

[riaqn]

一般我不用trunk，更新太快，不稳定。
比如strongswan在trunk上就连不上，在Break barrier上就没问题。

[shangjiyu]

@mozutaba uboot下刷入, bug待反馈(不知道,我自己用在自己设置下没有问题)... ss卡住?这只是个客户端, 具体还需自己设置服务器, 代理规则...

[tyhunter]

Mark，等回学校刷下试试

[mozutaba]

@shangjiyu 以前给装上了goagent，cpu和内存会爆满。然后单装adbyby，页面速度也太慢了。

[shangjiyu]

@mozutaba 具体也看问题，这个固件没有python

[lazycat]

@shangjiyu 嗯。。。要是能有图形界面配置就更好了。。。

[ivyswen]

能否分享一下，BB版增加ry-1支持的方法？

[shangjiyu]

@ivyswen 这个patch 你可以参考下

Index: target/linux/ramips/dts/RY-01.dts
===================================================================
--- target/linux/ramips/dts/RY-01.dts (revision 0)
+++ target/linux/ramips/dts/RY-01.dts (revision 0)
@@ -0,0 +1,130 @@
+/dts-v1/;
+
+/include/ "mt7620n.dtsi"
+
+/ {
+ compatible = "xcloud,ry-01", "ralink,mt7620n-soc";
+ model = "XCloud RY-01";
+
+ palmbus@10000000 {
+ gpio0: gpio@600 {
+ status = "okay";
+ };
+
+ gpio2: gpio@660 {
+ status = "okay";
+ };
+
+ gpio3: gpio@688 {
+ status = "okay";
+ };
+
+ spi@b00 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #compatible = "mx25l6405d";
+ compatible = "w25q128";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "w25q128";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+ };
+
+ ehci@101c0000 {
+ status = "okay";
+ };
+
+ ohci@101c1000 {
+ status = "okay";
+ };
+
+ ethernet@10100000 {
+ mtd-mac-address = <&factory 0x4>;
+ ralink,port-map = "wllll";
+ };
+
+ wmac@10180000 {
+ ralink,mtd-eeprom = <&factory 0>;
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "ephy", "wled";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ wan {
+ label = "xcloud:red:wan";
+ gpios = <&gpio2 0 1>;
+ };
+ lan4 {
+ label = "xcloud:red:lan4";
+ gpios = <&gpio2 1 1>;
+ };
+ lan3 {
+ label = "xcloud:red:lan3";
+ gpios = <&gpio2 2 1>;
+ };
+ lan2 {
+ label = "xcloud:red:lan2";
+ gpios = <&gpio2 3 1>;
+ };
+ lan1 {
+ label = "xcloud:red:lan1";
+ gpios = <&gpio2 3 1>;
+ };
+ air {
+ label = "xcloud:red:air";
+ gpios = <&gpio3 0 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 1>;
+ linux,code = <0x198>;
+ };
+ wps {
+ label = "wps";
+ gpios = <&gpio0 2 1>;
+ linux,code = <0x211>;
+ };
+ };
+};
Index: target/linux/ramips/mt7620/profiles/xcloud-ry-01.mk
===================================================================
--- target/linux/ramips/mt7620/profiles/xcloud-ry-01.mk (revision 0)
+++ target/linux/ramips/mt7620/profiles/xcloud-ry-01.mk (revision 0)
@@ -0,0 +1,18 @@
+#
+# Copyright (C) 2011 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/XCloud-RY-01
+ NAME:=XCloud RY 01
+ PACKAGES:=\
+ kmod-usb-core kmod-usb2 kmod-usb-ohci \
+ kmod-ledtrig-usbdev
+endef
+
+define Profile/Default/Description
+ Support for XCloud RY 01
+endef
+$(eval $(call Profile,XCloud-RY-01))

Property changes on: target/linux/ramips/mt7620/profiles/xcloud-ry-01.mk
___________________________________________________________________
Added: svn:executable
+ *

Index: target/linux/ramips/base-files/etc/board.d/01_leds
===================================================================
--- target/linux/ramips/base-files/etc/board.d/01_leds (revision 44550)
+++ target/linux/ramips/base-files/etc/board.d/01_leds (working copy)
@@ -202,6 +202,11 @@
set_wifi_led "asus:blue:air"
set_usb_led "asus:blue:usb"
;;
+ ry-01)
+ ucidef_set_led_default "power" "power" "xcloud:red:power" "1"
+ set_wifi_led "xcloud:red:wifi"
+ set_usb_led "xcloud:red:usb"
+ ;;
rp-n53)
ucidef_set_led_netdev "eth" "Network" "asus:white:back" "eth0"
set_wifi_led "asus:blue:wifi"
Index: target/linux/ramips/base-files/etc/board.d/02_network
===================================================================
--- target/linux/ramips/base-files/etc/board.d/02_network (revision 44550)
+++ target/linux/ramips/base-files/etc/board.d/02_network (working copy)
@@ -154,6 +154,7 @@
f5d8235-v2 | \
hg255d | \
rt-n14u | \
+ ry-01 | \
wrtnode | \
wt3020 | \
ur-326n4g | \
Index: target/linux/ramips/base-files/lib/ramips.sh
===================================================================
--- target/linux/ramips/base-files/lib/ramips.sh (revision 44550)
+++ target/linux/ramips/base-files/lib/ramips.sh (working copy)
@@ -172,6 +172,9 @@
*"Asus RT-N14U")
name="rt-n14u"
;;
+ *"XCloud RY-01")
+ name="ry-01"
+ ;;
*"Asus RT-N13U")
name="rt-n13u"
;;
Index: target/linux/ramips/base-files/lib/upgrade/platform.sh
===================================================================
--- target/linux/ramips/base-files/lib/upgrade/platform.sh (revision 44550)
+++ target/linux/ramips/base-files/lib/upgrade/platform.sh (working copy)
@@ -78,6 +78,7 @@
rt-n10-plus | \
rt-n13u | \
rt-n14u | \
+ ry-01 | \
rt-n15 | \
rt-n56u | \
rut5xx | \
Index: target/linux/ramips/image/Makefile
===================================================================
--- target/linux/ramips/image/Makefile (revision 44550)
+++ target/linux/ramips/image/Makefile (working copy)
@@ -858,6 +858,7 @@
Image/Build/Profile/MLWG2=$(call BuildFirmware/Default16M/$(1),$(1),mlwg2,MLWG2)
Image/Build/Profile/WMR300=$(call BuildFirmware/Default8M/$(1),$(1),wmr-300,WMR300)
Image/Build/Profile/RT-N14U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n14u,RT-N14U)
+Image/Build/Profile/RY-01=$(call BuildFirmware/Default16M/$(1),$(1),ry-01,RY-01)
Image/Build/Profile/WR8305RT=$(call BuildFirmware/Default8M/$(1),$(1),wr8305rt,WR8305RT)
Image/Build/Profile/WRTNODE=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode,WRTNODE)
Image/Build/Profile/WT3020=$(call BuildFirmware/PorayDualSize/$(1),$(1),wt3020,WT3020)
@@ -887,12 +888,12 @@
$(call Image/Build/Profile/MLWG2,$(1))
$(call Image/Build/Profile/WMR300,$(1))
$(call Image/Build/Profile/RT-N14U,$(1))
+ $(call Image/Build/Profile/RY-01,$(1))
$(call Image/Build/Profile/WR8305RT,$(1))
$(call Image/Build/Profile/WRTNODE,$(1))
$(call Image/Build/Profile/WT3020,$(1))
$(call Image/Build/Profile/XIAOMI-MIWIFI-MINI,$(1))
$(call Image/Build/Profile/ZBT-WA05,$(1))
- $(call Image/Build/Profile/ArcherC20i,$(1))
endef
endif

[shangjiyu]

@ivyswen 这个贴的好点。。 dts这里不对，你可以参考原生固件bootmsg 里修改
http://gist.github.com/shangjiyu/c25b847c5f0e62c428b3

[shangjiyu]

我擦。。 paste code test
https://gist.github.com/shangjiyu/c25b847c5f0e62c428b3

[ivyswen]

非常感谢！

[guanyongxin]

qos v4 正常了吗?git-15.020.45040-a46d203这个版本的QOS v4无效额..

[guanyongxin]

可以集成个qos-emong功能吗,原版的QOS功能用着实在蛋疼,想单IP限速都不行

[guanyongxin]

启动pdnsd显示错误

root@OpenWrt:~# /etc/init.d/pdnsd start
Starting proxy DNS server: pdnsdError: Bad config file permissions: file /etc/pdnsd.conf must be only writeable by the user.

[shangjiyu]

@guanyongxin 权限问题自己修改下好了，有空再折腾下QoS。 另981213大大的分支貌似有2860v2的优化和QoS补丁

[guanyongxin]

@shangjiyu 981213?有链接么?981213是V2EX的用户名吗

[shangjiyu]

@guanyongxin https://github.com/981213

[tyhunter]

LZ你好，我刷了你的固件之后，发现shadowsocks始终无法启动，试着用SSH连接路由器后手动开启SS也是没有反应，这是什么原因？

[shangjiyu]

@tyhunter 看下日志歪,

[tyhunter]

@shangjiyu dnsmasq和SS都没办法使用
Fri Mar 27 18:10:32 2015 daemon.info dnsmasq[2929]: reading /tmp/resolv.conf.auto
Fri Mar 27 18:10:32 2015 daemon.info dnsmasq[2929]: using local addresses only for domain lan
Fri Mar 27 18:10:32 2015 daemon.info dnsmasq[2929]: using nameserver 10.80.96.250#53
Fri Mar 27 18:10:32 2015 daemon.info dnsmasq[2929]: using nameserver 202.96.104.17#53
Fri Mar 27 18:10:32 2015 user.info autossh[5723]: starting ssh (count 1)
Fri Mar 27 18:10:32 2015 user.info autossh[5723]: ssh child pid is 5727
Fri Mar 27 18:10:32 2015 user.info autossh[5723]: ssh exited with error status 1; restarting ssh
Fri Mar 27 18:10:32 2015 user.info autossh[5723]: starting ssh (count 2)
Fri Mar 27 18:10:32 2015 user.info autossh[5723]: ssh child pid is 5729
Fri Mar 27 18:10:32 2015 user.info autossh[5723]: ssh exited with error status 1; restarting ssh
Fri Mar 27 18:10:32 2015 user.info autossh[5723]: starting ssh (count 3)
Fri Mar 27 18:10:32 2015 user.info autossh[5723]: ssh child pid is 5731
Fri Mar 27 18:10:32 2015 user.notice firewall: Reloading firewall due to ifup of wan (pppoe-wan)
Fri Mar 27 18:10:33 2015 user.info autossh[5723]: ssh exited with error status 1; restarting ssh
Fri Mar 27 18:10:33 2015 user.info autossh[5723]: starting ssh (count 4)
Fri Mar 27 18:10:33 2015 user.info autossh[5723]: ssh child pid is 5756
Fri Mar 27 18:10:33 2015 user.info autossh[5723]: ssh exited with error status 1; restarting ssh
Fri Mar 27 18:10:33 2015 user.info autossh[5723]: starting ssh (count 5)
Fri Mar 27 18:10:33 2015 user.info autossh[5723]: ssh child pid is 5757
Fri Mar 27 18:10:33 2015 user.info autossh[5723]: ssh exited with error status 1; restarting ssh
Fri Mar 27 18:10:33 2015 user.info autossh[5723]: starting ssh (count 6)
Fri Mar 27 18:10:33 2015 user.info autossh[5723]: ssh child pid is 5758
Fri Mar 27 18:10:33 2015 user.info autossh[5723]: ssh exited with error status 1; restarting ssh
Fri Mar 27 18:10:35 2015 daemon.info privoxy[3180]: Restart request due to 'ifup' of interface 'wan'
Fri Mar 27 18:10:35 2015 user.info autossh[5723]: starting ssh (count 7)
Fri Mar 27 18:10:35 2015 user.info autossh[5723]: ssh child pid is 5840
Fri Mar 27 18:10:35 2015 user.info autossh[5723]: ssh exited with error status 1; restarting ssh
Fri Mar 27 18:10:36 2015 daemon.notice privoxy[3180]: Shutdown successfully
Fri Mar 27 18:10:38 2015 daemon.notice privoxy[6090]: Started successfully
Fri Mar 27 18:10:38 2015 user.notice ddns-scripts[6108]: myddns_ipv4: PID '6108' started at 2015-03-27 18:10
Fri Mar 27 18:10:38 2015 user.warn ddns-scripts[6108]: myddns_ipv4: Service section disabled! - TERMINATE
Fri Mar 27 18:10:38 2015 user.warn ddns-scripts[6108]: myddns_ipv4: PID '6108' exit WITH ERROR '1' at 2015-03-27 18:10\n
Fri Mar 27 18:10:43 2015 user.info autossh[5723]: starting ssh (count 8)
Fri Mar 27 18:10:43 2015 user.info autossh[5723]: ssh child pid is 6159
Fri Mar 27 18:10:43 2015 user.info autossh[5723]: ssh exited with error status 1; restarting ssh
Fri Mar 27 18:11:01 2015 user.info autossh[5723]: starting ssh (count 9)
Fri Mar 27 18:11:01 2015 user.info autossh[5723]: ssh child pid is 6267
Fri Mar 27 18:11:01 2015 user.info autossh[5723]: ssh exited with error status 1; restarting ssh

[shangjiyu]

@tyhunter .... 一点有用的信息都没有... 你先关闭不需要的程序(autossh, privoxy 等等), 然后重启ss 看下log... (可能没有/etc/ipset 这个目录..) dnsmasq的话 默认是启用chinadns的(忽然发现默认配置里面有个172.16.7. 的内网ip... 失误)
折腾还是需要点知识的..

[yuhaaitao]

多谢，原来如意云1还可以刷这么多功能

[ivyswen]

我用你最新的补丁编译出来了，但是lan口、USB的灯都不亮。但是在luci里讲lan1-4、USB分别指向别的设备是可以亮的。

配置如下


config led 'led_power'
option name 'power'
option default '1'
option sysfs 'dteam:red:power'

config led 'led_wan'
option name 'wan'
option default '0'
option sysfs 'dteam:red:wan'
option trigger 'heartbeat'

config led 'led_wifi_led'
option name 'wifi'
option trigger 'netdev'
option mode 'link tx rx'
option default '0'
option dev 'ra0'
option sysfs 'dteam:red:wifi'

config led 'led_usb'
option name 'USB'
option trigger 'usbdev'
option dev '1-1'
option interval '50'
option sysfs 'dteam:red:usb'
option default '0'

[hero18688]

LZ你好，我用的型号是zbt-wa05，看上去led数量和分布跟如意云一样，但我把flash从8m改成16m后系统灯 无线灯就不亮了，请教下你是怎么修改的

[hero18688]

刷过楼主的固件里，网线插哪个口都是wan灯亮，其他不亮，但是通过gpio命令，网口灯都可以设置亮灭的，是因为每个灯没有关联到对应网口吗？希望修正

我看到如意云官方固件插拔网线会有对应网口提示
[ 68.390000] ESW: Link Status Changed - Port3 Link UP
[ 69.260000] ESW: Link Status Changed - Port3 Link Down
[ 73.370000] ESW: Link Status Changed - Port2 Link UP
[ 74.240000] ESW: Link Status Changed - Port2 Link Down
楼主固件没有。

[stcode]

RY-1刚刷了，无线设置页面打不开，提示网关错误，

[shangjiyu]

@stcode https://dev.openwrt.org/ticket/19768#comment:1
fixed 7 hours ago...

[stcode]

@shangjiyu 那我重刷试试。

[stcode]

@shangjiyu RY-1刷了，基本正常，无线发射速率最高只有54 Mbit/s，还有无线那个信道没有12，13，有时会出现12，13信道选择项，但是选择保存之后，无线就会关闭。辛苦了，

[stcode]

对比了几个固件才发现,原来楼主编译的是RY-1A这个型号,难怪无线只有54MB呢,无线驱动不匹配,
楼主能否帮忙帮忙编译一个RY-1的固件,配置了好久的编译环境都不成功.先谢谢了